Motion Pro 08-0048 Chain Alignment Tool

Product Information

The opinions expressed herein are mine, and do not represent that of any other humanoid past, present or future on this or any other planet. When the front wheel is pointing straight ahead, use a tape measure placed near the outer end of the rods to measure the distance from one rod to the other. When they're the same, your wheels are aligned. You're actually measuring the parallelism of the front and rear axles, but if the front wheel is in fact aligned with the long axis of the bike frame it's the same thing as measuring the alignment of the front and rear wheels. We apologize for any inconvenience caused, and we thank you for your continued support. Our fast dispatch times will resume shortly.

Best Motorcycle Chain Alignment Tool | Tru-Tension UK

if not done right your method can give two wheels that are both parallel but at an angle to the bike's long axis, you are relying on the triple tree index card to suppress that effect The most popular chain alignment tool among our customers - Profi CAT-Line- is now available in a smaller (12mm) and lighter version. The line laser “Profi SE-CAT-Line” is an ingenious and very precise tool, to control the adjusted chain alignment in a matter of seconds. This kit from tool expert Draper is a more professional-style version, which while taking on all the functions of the other kits, does so with more flexibility. It comes with four different-sized pins for various chains and once the pin is pushed out, has a plate for compressing the side plate of the master link onto the two pins.Bei meiner Werkstatt durfte ich den Kettenfluchttester bereits in Aktion sehen und war sehr begeistert. This is a fantastic little tool. It is very accurate When I was aligning my Kawasaki Zx10r's chain there was a point in the rotation where it wouldn't align. Upon further investigation there was a problem in the wheel hub. This problem couldn't be felt while riding and was only discovered because of the accuracy of this little tool. But using the above method to say "better than not having done so" is, in my mind, more consideration than most give.

Motorcycle Tools | Halfords UK Motorcycle Tools | Halfords UK

It doesn’t matter what make or model your bike is or whether it’s chain or belt-driven, the Laser Monkey provides accurate alignment on all motorcycles.Bauer Media Group consists of : Bauer Consumer Media Ltd, Company number 01176085; Bauer Radio Limited, Company number: 1394141; Older people who are reasonable, good-tempered, and gracious will bear aging well. Those who are mean-spirited and irritable will be unhappy at every period of their lives. They are for the most part. There's some minor deviation but not much. Basically, make sure your chain is clean and in usable condition first. Aligning your chain using the Laser Monkey helps to improve your motorcycle’s handling characteristics and optimise power delivery. Those who ride without their drivechain properly aligned have less control of the bike at high speeds.

The missing link: Best motorcycle chain tools | MCN

The Profi CAT lights up over the entire lower part of the chain. So you use a long distance to determine the short distance of the axis! Unfold our FTC disclosure melodrama here. The following article was last updated on Dec 15, 2021 ... Lose The Tool: Chain Alignment By Sight I take a different approach, and it is fraught with possible inaccuracies. But, I line it up best I can, then, with the bike rear wheel off the ground, spin the rear wheel several times around. Great bit of kit. Together with the chain monkey makes adjusting the chain on my 2009 GSXR-1000 literally a 30 sec job, and no guess work!”– RobThe Laser Monkey’s compact design means it’s small enough to be carried with you on your bike. How to use the Laser Monkey and align your motorcycle’s chain This tool from Laser will be invaluable when it comes to compressing the ends of a new chain together to slot the new link in. It sits inside two links and tightens by hand to bring the links close enough together so that the new link can be inserted into the open ends of each.This is another process that you may be able to achieve using normal pliers or by hand but again, it’s the right tool for the job and acts as a third hand – always useful in the garage or the workshop. The vast majority of motorcycles use a chain to carry drive from the output of the gearbox to the rear wheel. Sure, there are shaft-driven bikes – notably BMWs – as well as belt-driven examples but the humble chain is by far the easiest and most reliable when it comes to moving torque to the rear wheel.